1. sambaについて
1.1 sambaとはなにか?
samba(サンバ)はUNIXおよびLinuxなどのUNIX互換OSで、Windowsのファイル共有機能を実現するソフトです。各ユーザーで共有できるパブリックフォルダとUNIXユーザーのディレクトリを共有するユーザーフォルダ機能があり、Linuxなどのオープンソースで低価格でファイル共有サーバが作成できます。
sambaにはプリンタ共有機能もあります。これを使うことで古いマシンをファイル/プリンタサーバとして使うことができ、コストをかけずにサーバー機能を組むことができます。
1.1 sambaを手に入れる
sambaはsamba日本ユーザ会などからダウンロードできます。
また、今回インストールするVine Linuxにはrpmパッケージでも提供されています。
今回は、rpmパッケージを使ってインストールするためsamba自体のダウンロードは行いません。
なお、'07/05/31現在のsambaのバージョンはsamba 3.0.23となります。
2. sambaのインストール
2.1 sambaをインストールする
sambaはVine Linuxのパッケージとして提供されています。今回は、Vineのパッケージマネージャーであるaptを使い、sambaをインストールします。
次の手順で、sambaをインストールします。
- rootでログインします。
[atsushifx@agartha atsushifx]$ su
パスワード(P):
[root@agartha atsushifx]#
- aptを使い、sambaをインストールします。
[root@agartha atsushifx]# apt-get install samba
パッケージリストを読みこんでいます... 完了
依存情報ツリーを作成しています... 完了
以下の追加パッケージがインストールされます:
samba-common
以下のパッケージが新たにインストールされます:
samba samba-common
アップグレード: 0 個, 新規インストール: 2 個, 削除: 0 個, 保留: 0 個
8671kB のアーカイブを取得する必要があります。
展開後に 21.9MB のディスク容量が追加消費されます。
続行しますか? [Y/n] y
取得:1 http://updates.vinelinux.org 4.1/i386/updates samba-common 3.0.23d-0vl1.1 [4515kB]
取得:2 http://updates.vinelinux.org 4.1/i386/updates samba 3.0.23d-0vl1.1 [4156kB]
8671kB を 5s 秒で取得しました (1640kB/s)
変更を適用しています...
準備中... ########################################### [100%]
1:samba-common ########################################### [ 50%]
2:samba ########################################### [100%]
完了
[root@agartha atsushifx]#
以上で、sambaのインストールは完了です。
2.2 sambaを初期設定する
sambaの設定ファイルを編集し、自分の環境に合わせます。さらに自動起動およびデーモンの起動を行い、実際にファイル共有ができるようにします。
次の手順で、sambaを初期設定します。
- sambaをインストールすると、/etc/samba/smb.confというファイルが作成されます。このファイルを編集することで、ファイル共有などの環境を設定します。
以下のように、smb.confファイルを設定します。
- /etc/samba/smb.conf
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba,
# read the Samba-HOWTO-Collection. This may be obtained from:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the
# Samba-Guide which is generated daily and can be downloaded from:
# http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors.
#
#======================= Global Settings =====================================
[global]
# charset (euc-jp)
unix charset = eucJP-ms
dos charset = cp932
display charset = eucJP-ms
# charset (UTF-8)
; unix charset = UTF-8
; dos charset = cp932
; display charset = UTF-8
# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
workgroup = PRIVATE
# server string is the equivalent of the NT Description field
server string = Samba Server on %h
# Security mode. Defines in which mode Samba will operate. Possible
# values are share, user, server, domain and ads. Most people will want
# user level security. See the Samba-HOWTO-Collection for details.
security = user
encrypt passwords = yes
username map = /etc/samba/smbusers
# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
; hosts allow = 192.168.1. 192.168.2. 127.
# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
load printers = yes
# you may wish to override the location of the printcap file
; printcap name = /etc/printcap
# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
; printcap name = lpstat
# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
printing = cups
# This option tells cups that the data has already been rasterized
cups options = raw
# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest
# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log
# Put a capping on the size of the log files (in Kb).
max log size = 50
# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>
# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
; realm = MY_REALM
# Backend to store user information in. New installations should
# use either tdbsam or ldapsam. smbpasswd is available for backwards
# compatibility. tdbsam requires no further configuration.
; passdb backend = tdbsam
# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
# this line. The included file is read at that point.
; include = /usr/local/samba/lib/smb.conf.%m
# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no
# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33
# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes
# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes
# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes
# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat
# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U
# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes
# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z
# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes
# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
dns proxy = no
# These scripts are used on a domain controller or stand-alone
# machine to add or delete corresponding unix accounts
; add user script = /usr/sbin/useradd %u
; add group script = /usr/sbin/groupadd %g
; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
; delete user script = /usr/sbin/userdel %u
; delete user from group script = /usr/sbin/deluser %u %g
; delete group script = /usr/sbin/groupdel %g
# mask
create mask = 0664
directory mask = 0775
#============================ Share Definitions ==============================
[homes]
comment = %U's Home Directory
browseable = no
writable = yes
; create mask = 0644
; directory mask = 0755
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /var/samba/netlogon
; guest ok = yes
; writable = no
; share modes = no
# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /var/samba/profiles
; browseable = no
; guest ok = yes
# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
;[printers]
; comment = All Printers
; path = /var/spool/samba
; browseable = no
;# Set public = yes to allow user 'guest account' to print
; guest ok = no
; writable = no
; printable = yes
# This one is useful for people to share files
[tmp]
comment = Temporary file space
path = /tmp
read only = no
public = yes
# A publicly accessible directory, but read only, except for people in
# the "staff" group
[public]
comment = Public Space for Everyone
create mask = 0000
path = /var/samba/public
public = yes
writable = yes
printable = no
allow people in the "staff" group to write
write list = @staff
- sambaでは、/etc/samba/smbpasswdにユーザーとパスワードを設定します。次のようにしてログオンするユーザとパスワードを設定します。
[root@agartha samba]# smbpasswd -a nobody
New SMB password:
Retype new SMB password:
Added user nobody.
[root@agartha samba]# smbpasswd -a atsushifx
New SMB password: *******
Retype new SMB password: *******
Added user atsushifx.
[root@agartha samba]#
以上で、ユーザーとパスワードの設定は終了です。なお、nobodyはからのパスワードを設定していますので誰でもアクセスできるようになっています。
- sambaではWindowsユーザーとsambaを入れたLinuxユーザとのマッチングをするための機能がついています。
/etc/samba/smbusersがそれで、ここに共有したいユーザー名とLinuxのユーザー名を入れることで日本語でのユーザーでもファイル共有することができます。
Windows2000以降では、ログインユーザー名を指定できるのでこの機能は必要ありません。Windows98などの旧いWindowsを使う場合に設定します。
ここでは、母のマシンからログインできるように以下のようにユーザー名を指定します。
- /etc/samba/smbusers
-
1:# Unix_name = SMB_name1 SMB_name2 ...
2:root = administrator admin
3:nobody = guest pcguest smbguest "古川 幸子"
- OS起動時に自動的にsambaサービスが起動するようchkconfigで軌道スクリプトを設定します。
[root@agartha atsushifx]# /sbin/chkconfig smb on
[root@agartha atsushifx]#
- 起動スクリプトを実行し、sambaサービスを起動します。
[root@agartha samba]# /etc/init.d/smb start
SMBサービスを起動中: [ OK ]
NMBサービスを起動中: [ OK ]
[root@agartha samba]#
- ファイアウォールを設定する。
Vineではファイアウォールiptables により、ファイル共有のためのネット接続ができないようになっています。次のようにiptablesを再設定し、ファイル共有がつながるようにします。
- /etc/sysconfig/iptables
-
31:[0:0] -A INPUT -p tcp -m tcp --dport 139 -j ACCEPT
32:[0:0] -A INPUT -p udp -m udp --dport 138 -j ACCEPT
33:[0:0] -A INPUT -p udp -m udp --dport 137 -j ACCEPT
上記のように設定し、/etc/init.d/iptables restartとしてファイアウォールを再起動します。
以上で、sambaの初期設定は終了です。
|